Quick Answer: How Do You Read Cp And Cpk Values?

How do you interpret process capability index?

Generally, higher Cpk values indicate a more capable process.

Lower Cpk values indicate that your process may need improvement.

Compare Cpk with a benchmark that represents the minimum value that is acceptable for your process.

Many industries use a benchmark value of 1.33..

How many Sigma is 1.67 Cpk?

Sigma level tableTwo sided tableCpk PpkSigma levelPPM out of tolerance1.334.063.3421.504.56.7951.675.00.5738 more rows

What is a good CP value?

By convention, when a process has a Cp value less than 1.0, it is considered potentially incapable of meeting specification requirements. Conversely, when a process Cp is greater than or equal to 1.0, the process has the potential of being capable. Ideally, the Cp should be as high as possible.

What is minimum Cpk value?

The minimum value of “k” is 0 and the maximum is 1.0. A perfectly centered process will have Cp = Cpk. Both Cpk and Ppk relate the standard deviation and centering of the process about the midpoint to the allowable tolerance specifications. An estimate for Cpk = Cp(1-k).

What does a Cp of 1.5 mean?

A Cp of less than one indicates that the process spread is greater than the specification. This means that some of the data lies outside the specification. … So a Cp of 1.5 means the process can fit inside the specification 1.5 times. A Cp greater than one is obviously desirable.

Can CP CPK be negative?

Both Cpk and Ppk can be a negative numbers. It means that, on average, the process is not meeting customer requirements.

What is CP CPK?

Cp and Cpk, commonly referred to as process capability indices, are used to define the ability of a process to produce a product that meets requirements. … Specifications are normally defined in terms of nominal (+/-) tolerances or ranges (low to high.

What should be the Cp and Cpk value?

We generally want a Cpk of at least 1.33 [4 sigma] or higher to satisfy most customers. Cpk can have an upper and lower value reported. If the upper value is 2 and the lower is 1, we say it has been shifted to the left.

What does a Cpk of 1.33 mean?

Cpk = or >1.33 indicates that the process is capable and meets specification limits. Any value less than this may mean variation is too wide compared to the specification or the process average is away from the target.

What does CPK 1.67 mean?

Excellent, CapableThe Capability Index, Cpk. The outcome of a Process Capability study is a single metric, which provides an indication of the ability of a process to consistently provide output which is within required specifications. CPK <1.00 (Poor, incapable) 1.00< CPK <1.67 (Fair) CPK >1.67 (Excellent, Capable)

What is Cp and Cpk formula?

The equation for Cpk is more complicated: [minimum(mean – LSL, USL – mean)] / (0.5*NT). LSL stands for Lower Specification Limit and USL stands for Upper Specification Limit. Often we describe Cpk as the capability the process is achieving whether or not the mean is centered between the specification limits.